- All Categories
- HOME PRODUCTS
-
-
Holder for Hairdryer
Holder for Hairdryer
by Starscream83, published Jan 31, 2016
$9.89
SummaryInner diameter is 65mm,Distance from Flat plane to "eye center" is 90mm, use 3mm screws to fix it, use a higher infill (30-40%) to give the holder the right stiffness
Print request
Free .stl file
DOWNLOADSummaryJust a little helper :) Inner diameter is 65mm, Distance from Flat plane to "eye center" is 90mm use 3mm screws to fix it use a higher infill (30-40%) to give the holder the right stiffness I recommend using ABS as PLA might not resist the Heat from the Hairdryer after using. Prints well without supports Enjoy
Printing details not available.